| 國立勤益科技大學 |
2010-02 |
Tool life And Surface Integrity when Milling Inconel718 With Coated Cemented Carbide Tools
|
陳紹賢 |
| 淡江大學 |
2018-11-16 |
Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming
|
Li, Ching-Lun;Ni, Yung-Kuan;Yang, Hao;Lu, Yuung-Hwa |
| 淡江大學 |
2019-09 |
Tool Path and Sheet Thickness Distribution of Axisymmetric Cup in Single Point Incremental Forming
|
Li, Ching-Lun;Ni, Yung-Kuan;Haw, Yang;Lu, Yuung-Hwa |
| 國立高雄應用科技大學 |
2012 |
Tool Path Design and Cutting Condition Optimization of Thin and Hard-to-Cut Material in Mechatronic Engineering
|
Xu, Dong-Mei; Sheu, Jinn-Jong; Liu, Chin-Wei |
| 中原大學 |
1992-07 |
Tool Path Generation Algorithms by Controlling Engage Angle
|
Tsai, M. D. |
| 正修科技大學 |
0000-00-00 |
Tool path generation method for multi-axis machining of helical milling cutter with specific cross-section profile
|
李政男 |
| 國立臺灣大學 |
1999 |
Tool Path Planning for Multi-axis Machining
|
Young, H.T.; Kan Lun-Wei |
| 國立臺灣大學 |
1999-07 |
Tool Path Planning for Multi-axis Machining
|
Young, H.T.; Kan Lun-Wei |
| 臺大學術典藏 |
2022-05-24T06:26:32Z |
Tool path transformation of tilted plane machining features for five-axis numerical control programming
|
She C.-H.;Zheng Z.-H.;Jywe W.-Y.; She C.-H.; Zheng Z.-H.; Jywe W.-Y.; Wen-Yuh Jywe |
| 國立交通大學 |
2014-12-08T15:18:11Z |
Tool planning in the scenario of multiple existing semiconductor fabs
|
Wu, MC; Hsiung, Y; Hsu, HM |
| 中華大學 |
2009 |
Tool Portfolio Planning In The Back-End Proc-Ess Of Wafer Fabrication With Sequential Time Constraints
|
杜瑩美; Tu, Ying Mei |
| 臺大學術典藏 |
2008-11-05T05:26:10Z |
Tool positioning for noncircular cutting with lathe
|
Tsao, T. C.; Renn, S.; Chen, M. S.; Tomizuka, M.; Tomizuka, M.; Chen, M. S.; Renn, S.; Tsao, T. C. |
| 國立臺灣大學 |
1987 |
Tool positioning for noncircular cutting with lathe
|
Tomizuka, M.; Chen, M. S.; Renn, S.; Tsao, T. C. |
| 元培科技大學 |
2015-09 |
Tool Replacement for Photovoltaic Industry Processes With Multiple Characteristics Based on Capability Index
|
Hsu, Y., Jane, A., and Pearn, W. L. |
| 國立交通大學 |
2015-12-02T02:59:41Z |
Tool Replacement for Photovoltaic Industry Processes With Multiple Characteristics Based on Capability Index
|
Hsu, Ya-Chen; Jane, Amber; Pearn, W. L. |
| 國立交通大學 |
2014-12-08T15:16:22Z |
Tool replacement for production with a low fraction of defectives
|
Pearn, WL; Hsu, YC; Wu, CW |
| 國立臺灣科技大學 |
2006 |
Tool replacement for production with a low fraction of defectives
|
Pearn, W. L. ; Hsu, Y. C. ; Wu, Chien-Wei |
| 元培科技大學 |
2006 |
Tool Replacement for Production with Low Fraction Defective,
|
Pearn, W. L.; Hsu, Ya Chen ; Wu, Chien-Wei |
| 國立交通大學 |
2014-12-08T15:13:32Z |
Tool replacement policy for one-sided processes with low fraction defective
|
Pearn, W. L.; Hsu, Y-C; Shiau, J-J Horng |
| 元智大學 |
2009-12 |
Tool Replacement Policy for Processes with High Yields
|
林真如 |
| 國立臺灣大學 |
2009-05 |
Tool Support for Learning Buchi Automata and Linear Temporal Logic
|
Tsay, Y. -K.; Chen, Y. -F.; Tsai, M. -H.; Wu, K. -N.; Chan, W. -C.; Luo, C. -J.; Chang, J. -S. |
| 臺大學術典藏 |
2018-09-10T07:28:16Z |
Tool support for learning Büchi automata and linear temporal logic
|
Tsay, Y.-K.;Chen, Y.-F.;Tsai, M.-H.;Wu, K.-N.;Chan, W.-C.;Luo, C.-J.;Chang, J.-S.; Tsay, Y.-K.; Chen, Y.-F.; Tsai, M.-H.; Wu, K.-N.; Chan, W.-C.; Luo, C.-J.; Chang, J.-S.; YIH-KUEN TSAY |
| 國立臺灣海洋大學 |
2014-02 |
Tool wear and hole quality when single shot drilling of metallic-composite stacks with diamond coated tools.
|
C. L. Kuo; S. L. Soo; D. K. Aspinwall; S. Bradley; W. Thomas; R. M’Saoubi; W. Leahy; D. Pearson |
| 中華大學 |
2008 |
Tool Wear Automatic Monitoring System Based on The Multiple Parameters of The Cutting Force And Machine Vision Technique
|
邱奕契; Chiou, Yih-Chih |
| 元智大學 |
2013-08-23 |
Tool wear diagnosis and tool replacement management
|
Chen-ju Lin; Chun-hung Chien |
| 國立臺灣科技大學 |
2002 |
Tool Wear Investigation on Precision Progressive Die for IC Dam-bar Cutting Process
|
Lin, Z. C.;Chang, D. Y. |
| 國立成功大學 |
2018-03-23 |
Tool wear monitoring and predicting method
|
Yang, Haw-Ching;Cheng, Fan-Tien; 鄭芳田 |
| 國立臺灣科技大學 |
2019 |
Tool wear monitoring and prediction based on sound signal
|
Liu, M.-K.;Tseng, Y.-H.;Tran, M.-Q. |
| 元智大學 |
2013-02-27 |
Tool wear monitoring and yield evaluation
|
Chen-ju Lin; Chun-hung Chien |
| 中華大學 |
2009 |
Tool Wear Monitoring Using Machine Vision and Taguchi Method
|
邱奕契; Chiou, Yih-Chih |
| 中華大學 |
2008 |
Tool Wear Monitoring: an Automated System Based on Multiple Cutting Force Parameters and Machine Vision Technique
|
邱奕契; Chiou, Yih-Chih |
| 中華大學 |
2009 |
Tool Wear Monitoring: an Automated System Based on Multiple Cutting Force Parameters and Machine Vision Technique
|
邱奕契; Chiou, Yih-Chih |
| 育達商業科技大學 |
2010 |
Tool Wear Optimization for General CNC Turning Using Fuzzy Deduction
|
藍, 天雄;Tian-Syung , Lan |
| 中國文化大學 |
2012 |
Tool Wear, Hole Characteristics, and Manufacturing Tolerance in Alumina Ceramic Microdrilling Process
|
Chang, DY (Chang, Dar-Yuan); Lin, SY (Lin, Shu-Yi) |
| 中國文化大學 |
2011 |
Tool Wear, Hole Characteristics, and Manufacturing Tolerance in Alumina Ceramic Microdrilling Process
|
張達元 |
| 國立成功大學 |
2024-09 |
Tool, Threat, Tutor, Talk, and Trend: College Students' Attitudes toward ChatGPT
|
Yu;Sen-Chi;Huang;Yueh-Min;Wu;Ting-Ting |
| 國立成功大學 |
2024 |
Tool, Threat, Tutor, Talk, and Trend: College Students’ Attitudes toward ChatGPT
|
Yu;S, -C.;Huang;Y, -M.;Wu;T, -T. |
| 國立交通大學 |
2014-12-08T15:08:46Z |
Tool, Toy, Telephone, Territory, or Treasure of Information: Elementary school students' attitudes toward the Internet
|
Chou, Chien; Yu, Sen-chi; Chen, Chao-hsiu; Wu, Huan-Chueh |
| 國立交通大學 |
2014-12-08T15:30:52Z |
Tool, toy, telephone, territory, trade, or treasure of information: a cross-sectional study of Taiwanese students' attitudes toward the Internet
|
Chou, Chien; Wu, Huan-Chueh; Chen, Chao-Hsiu |
| 國立勤益科技大學 |
2011-04 |
Tool-path Generation for Conical Groove of Cylindrical Cams by Small-sized Cutting Tools
|
洪瑞斌 |
| 大葉大學 |
2011-02-01 |
Tool-path Generation for Conical Groove of Cylindrical Cams by Small-Sized Cutting Tools
|
Hung, Jui-Pin;Chiu, Kuan-lin;Lai, Yuan-Lung |
| 大葉大學 |
2011-04-09 |
Tool-path Generation for Conical Groove of Cylindrical Cams by Small-sized Cutting Tools
|
Lai, Yuan-Lung |
| 大葉大學 |
2011-02-1 |
Tool-path Generation for Conical Groove of Cylindrical Cams by Small-Sized Cutting Tools
|
Hung, Jui-Pin;Chiu, Kuan-lin;Lai, Yuan-Lung |
| 朝陽科技大學 |
2018-12-07 |
Toolbox媒合系統
|
張華欣;陳思予;陳宏明;謝宛玲;張少鍇;詹竣 |
| 中州科技大學 |
1992-06 |
TOOLING DESIGN FOR ELECTROCHEMICAL MCSHINING USING BODY-FITTED TRANSFORMATION TECHNIGUE
|
陳志誠 |
| 嘉南藥理大學 |
2016 |
Tooling design improvement of multistage cold forging of specialty shaped nuts using CAE and 3D printing
|
Hsia, Shao-Yi; Chou, Yu-Tuan |
| 大葉大學 |
2006-11 |
Toolpath Generation for an Ellipse by Piecewise Circular Arcs
|
賴元隆 |
| 國立臺灣科技大學 |
2007 |
Toolpath Generation for Diamond Shaping of Aspheric Lens Array
|
Chen, C.-C. A.; Chen, Chien-Ming ; Chen, Jr-Rung |
| 淡江大學 |
1994-11-09 |
Tools cooperation in an integration environment by message-passing mechanism
|
Chung, Chi-ming; Wang, Ying-hong; Hsieh, Gwo-ching; Lin, Wei-chuan; Kuo, Ying-feng |
| 國立臺灣科技大學 |
2010 |
Tools for Detecting Digital Image Forgeries and Extended Applications
|
LE THANH NAM |
